The BAT (got me) 1 hundred
Full Speed Bat 100, 1s brushless drone/quad is everything you want.
But SPEED !
Noooo ...
I didn't fly it yet.
Will i ?
I received it with (One) missing motor's screw
+
One useless motor.
((and) Or the ESCs, Or the FC, Or everything)
I had to deal with customer support team,
wich handle my case with care.
(Thanks to Howard).
+
Time goes on.
Still doesn't work !
+
A lot of fun soldering to come.
Probably.
Can't wait.
The BAT 100
The flying nightmare.
GOT ME.
+
It is NOT a beginner one.
The carbon fiber is tiny.
ESC board is tiny.
FC board is tiny.
Motors are tiny (weak).
Flight Time is probably : Tiny.
So tiny,
Give it a try :
But keep cool.
That's a brushless one.
You aren't going to change motors often (Cool Kidding).
SPECIFICATIONS / PARTS
Flight Controller :
Teeny 1S F4 6A 4 in 1
http://bit.ly/BGTeeny1sF46A4in1
* You may buy directly on full speed rc the F3 board version.
Carbon Frame :
http://bit.ly/BGBat100CFFrame
Camera :
AIO Turbowing 700TVL Wide Angle
http://bit.ly/BGoodAIO700TvlTurbowing
* Alternate
Lipo :
1S 25C Battery 500mAh
http://bit.ly/Mcpx1S500mah
Connector: Mcpx
Gaoneng GNB 550mAh 1S 80/160C
http://bit.ly/BG1S550ma
Connector: Jst-losi
* Alternate
Motor :
Sunnysky 0705 15000KV 1S Brushless Motor
http://bit.ly/BG07051sBruslessMotor
* Alternate
REFERENCES
CONFIGURATION
#Betaflight / OMNIBUS (OMNI) 3.2.3
set gyro_sync_denom = 1
set gyro_lowpass_type = PT1
set gyro_lowpass_hz = 90
set gyro_notch1_hz = 400
set gyro_notch1_cutoff = 300
set gyro_notch2_hz = 200
set gyro_notch2_cutoff = 100
set vbat_max_cell_voltage = 43
set vbat_full_cell_voltage = 41
set vbat_min_cell_voltage = 23
set vbat_warning_cell_voltage = 28
set vbat_hysteresis = 1
set dterm_lowpass_type = BIQUAD
set dterm_lowpass = 100
set dterm_notch_hz = 260
set dterm_notch_cutoff = 160
#Kidding Cool
DOWNLOAD
- Flight Controller
- Dump